DIYFOAM Spray Urethane Foam - Made Easy, Do it Yourself, (DIY)
DIYFOAM is a DIY, Do It Yourself Spray Urethane Foam with a hard skin, soft middle spray urethane foam. The B-side is made from regrowable energy.
DIYFOAM is spray in place urethane foam to leave you with more insulation dollar per inch.
Spray urethane foam is known throughout the world as the best in insulation due to its high R factor and ability to fill cracks and crevices.
The FastKick Spray Gun/Proportioner has become the easiest way to apply multi component materials for Do It Yourself Spray Urethane Foam. Your air compressor, 5 HP 220 Electric, 8HP Gas or above is all that is required. no electric, no heaters, just an air hose.
The air motor pushes the two positive displacement rods up equally through both cartridges at the same time and pressure to assure perfect one to one ratio spray.
All Spray Urethane Foams by DIYFOAM have been sprayed as low as 50 Degrees F. To achieve yield and proper reaction in the colder environments cartridges must be heated to between 90 F to 100 F which can be accomplished by soaking in hot water or use of an electric blanket